Aspire Cygnet 80W Box Mod is powered by single high rate 18650 battery and maximum output can be reached to 80W. Aspire Cygnet Mod features a compact size measured 72mm by 45mm by 23.5mm that is convenient to carry out, featuring the up/down button is located on the base of mod for easy operation.
Descriptions: Aspire Cygnet 80W Box Mod is the latest pod mod from Aspire, which is powered by single high rate 18650 battery and maximum output can be reached to 80W to offer you great vaping experience. Aspire Cygnet Mod features a compact size measured 72mm by 45mm by 23.5mm that is convenient to carry out, which comes with a large 0.86 inch OLED display screen and a micro USB charging port. Cygnet Mod features the up/down button is located on the base of mod for easy operation.
Specifications: Dimension: 72mm(H) x 45mm(W) x 23.5mm(T) Wattage Range: 1-80W Voltage Range: 0.5-8.0V Working Modes: Varible Wattage, Varible Resistance Parameter: 0.1-3.5Ω Screen Type: 0.86inch OLED display Battery Type: 1 x 18650 Color: Red/Black, Blue/Rainbow, Pink/Rainbow, Green/Gold, Gray/Gold, Black/Gray
Package Includes: 1 x Cygnet Mod 1 x USB Cable 1 x Warranty Card 1 x User Manual
Cygnet Mod Dimensions
With a thickness of 23.5mm the Cygnet can easily accommodate the majority of your tanks with little or no ‘overhang’! It has no sharp angles in its design making it very comfortable to fit in the hand.
The cygnet has three modes of use, Variable Wattage (1-80w), Variable Voltage (0.5-8v), and Bypass. The Cygnet will fire at resistances between 0.1 and 3.5ohms. It employs a single replaceable 18650 battery which should be of the high rate discharge type. It has an easy to read 0.86 inch OLED screen and a micro USB charging port.
Cygnet Battery Installation
Installing the battery is simplicity itself, just unscrew the battery cover on the base, insert the battery positive contact uppermost (first) then screw the battery cover back in.
Note: always use freshly charged batteries with no damage to the wrappers.
The cygnet comes with all the usual safety features you come to expect from Aspire.
Charging couldn’t be easier, just attach the supplied micro USB cable to the charging port and attach to a power supply, the maximum charge current is 1amp. When the battery charge reaches 4.2V or is fully charged, the mod will stop charging and the screen will switch off. Please note: Do not leave your mod unattended while charging and always use the usb cable provided to prevent damage to the mod.