Your shopping cart is empty!
Your search returned no results.
Sky Solo Plus
Drone BF Mod
Oct 29, 2018
Do you have any ideas to choose the best vape kit with RDA tank? Vape RDA Kit will bring you larger vapor with tiny size than vape pen kit and vape mod RDA kit.
UWELL Nunchaku RDA Kit is a new generation of tube mods, which is powered by a single 18650 battery with the maximum output can fire up to 80W. With Pocket sized and Ergonomic design, UWELL Nunchaku RDA Kit has great feeling when hold in hand and you are on the go. The Nunchaku RDA Tank comes with big post that has wide space for building single coils or dual coils. There are three modes including VW mode, TC mode and Bypass mode for different resistance options.
Size: 27.4mm * 129.1mm
Power range: 5-80W
Battery: 1* 18650 battery (not include)
Standby current: <50uA
Resistance range: 0.1-3ohm(VW)/ 0.1-1ohm(TC)/0.1-5ohm(Bypass)
Temperature range: 200-600ºF/100-300℃
Simple and pocket size designed, convenient to carry
Powered by single 18650 battery and support 80W maximum output
Simple build deck for easy building
Dual airflow system for single or dual coils
Power/SS/Ni/Bypass mode switchable
Compatible with Squonk Mod
The VGOD Pro Mech 2 Kit is intended for serious, experienced vapers looking for the very best in cloud and trick vaping. Powered by a single 18650 battery (25-30A recommended), it pairs the Pro Mech 2 mod with the renowned Elite RDA to consistently produce thick, flavorful vapor.
For a solid yet comfortable grip, the Pro Mech 2 mod comes in a dual-surface finish combining soft-touch delrin and powder coated copper. Rounding out the design is the innovative TriCon copper firing switch, designed for consistent, near-instantaneous firing from any angle of pressing.
Removable Delrin Grip
Internal Battery Protector (Internal Tube)
Premium Quality Copper Construction
New Tri-COn Firing Switch Design
3 Independent prongs help the firing button make solid contact with Battery
Built in self adjusting battery ring to lock battery in place
Carbon fiber switch
Material: Copper, stainless steel
Mod Size: 24.1±0.10mm(d) x 85.3±0.10mm(l)
Connection Type: 510 thread
Black Elite RDA shield
Well depth 9.25mm
Well capacity 2ml
Hybrid friendly protruding gold plated 510 pin
33mm (less 510) Height
Dual posts, 2mm hole
Finger tight nut, philips or flat
Post hole spacing, ID 11mm
The Wismec Luxotic NC Kit by Jaybo Design & Wismec bundles the Luxotic NC Mod and Guillotine V2 RDA providing a highly capable and versatile setup. Powered by two high amp 18650 or 20700 batteries, the Luxotic NC presents a stunning brushed stainless steel and acrylic resin finish with multiple on-board protections. With two switch-activated output modes, users can quickly switch between parallel or series mode. In series mode, the voltage regulating switch can be utilized to adjust the voltage output between 1.3V and 5.3V.
The Guillotine V2 RDA measures 24mm in diameter and includes a 25.5mm in diameter atomizer ring for aesthetic appeal on larger diameter devices. The Guillotine V2 features a two post clamp deck designed for dual coil configurations with a deep juice well. Featuring a bifunctional airflow barrel, the Guillotine V2 can be used with dual adjustable angled bottom airflow or direct side airflow by simply flipping the airflow barrel upside down. Angled bottom airflow is adjusted by rotating the airflow barrel while direct side airflow is adjusted by rotating the top cap. In addition, the Guillotine V2 is squonk mod compatible by utilizing the included gold plated squonking pin.
Dimensions - 96.2mm by 54.5mm by 26.6mm
Dual High-Amp 20700 Batteries - (Batteries Sold Separate)
Optional Dual High-Amp 18650 Batteries (Batteries Sold Separate)
Maximum Wattage Output: 250W
Voltage Output Range: 1.3-5.3V
Two Output Mode - Series & Parallel
PCB Circuit Board
Adjustable Voltage Controller
Single Button Operation - Firing Mechanism
Bottom-Loaded Sliding Battery Door
24mm Base Diameter
Optional 25.5mm Ring Base
6mm Deep Juice Well
Superior Stainless Steel Construction
Horizontal Two-Post Build Deck
Top Secured via Hex Screws
Single or Dual Coil Configuration
Dual Slotted Airflow Control - Side or Bottom
810 Resin Widebore Drip Tip
Optional 810 ULTEM Drip Tip
The Smoant Battlestar Nano RDA 80W Starter Kit presents a compact, travel-friendly set-up with the efficient Battlestar Nano 80W Box Mod to pair with the 24mm Battlestar RDA. Engineered with reduction in size and ergonomic structure from the iconic Battlestar 200W, the Battlestar Nano implements a screenless design for battery efficiency. Powered by a single 18650 battery (sold separately), it can fired up to 80W of maximum power for mid-wattage usage. Pairing with the device is the Battlestar 24mm RDA, featuring a horizontal two-post, four terminals build deck design and dynamic side airflow control.
Mod size: 37 x 24 x 81mm
Max output: 80W
Battery using: single 18650 (Not included)
Max output current: 40A
Max output voltage: 4.2V
Size: 22x 24mm
Material: 304 SS and resin
Sigelei brings us the new Sigelei Top 1 230W box mod with a new chip set to match. This mod features a sleek sophisticated design that will not disappoint. With a large color display, 1.3", the Top 1 box mod can fit your vaping needs while also increasing your convenience. Powered by dual 18650 batteries (sold separately) this mod will be your next favorite thing. The Sigelei Top1 RDA Kit is pairs perfectly in design and function with this powerful mod to produce maximum clouds. This RDA is made from stainless steel and aluminum material and has side adjustable airflow.
Main material: Zinc alloy
Display: 1.3 TFT circular screen
Wattage range: 10W-230W
Temperature range: 100℃-300℃/200℉-570℉
Voltage input: 6.4V-8.4V
Voltage output: 1.0V-7.5V
Maximum current: 38A
Battery support: 2*18650
Modes: POWER/SS316/SS317/ Ni200/ TCR/ Ti1
Resistance range: 0.05Ω-3.0Ω
Coil supporting: Nickel chrome / stainless steel (316/317/304) / Titanium wire/ nickel 200 / TCR
Charging support (Micro USB): DC 5V/2.5A
Support software upgrade
you must be of legal age in your state to visit this site
If you have an account, please sign in.
This is a required field.
or connect via
E-Mail Address does not appear to be valid!
Password must be between 6 and 20 characters!
Password confirmation does not match password!
Terms and Conditions