KangerTech CUPTI 2 Review
The Kangertech CUPTI 2 is the upgraded from Kanger’s original CUPTI. As we all know, The CUPTI 2 has an internal 5 ml tank, also can accepts external tanks. It utilized upgradeable firmware which make it has multiply functions. Now I will share the review of Kanger CUPTI 2 with you.
We can see a CUPTI 2, a CLOCC(SUS316L) 0.5Ohm, Second connector and USB cable, a user manual in the package.
There are many heat emission holes on the body. On the top of the mod there is a ‘CUPTI’ logo and 510 drip tip which is removable. Also there is an adjustable airflow. You can adjust the airflow according to your needs.
On the bottom of the mod there is a battery compartment. The mod is power by two external 18650 batteries. Open the battery compartment, we can see the positive and negative signs are indicated. In addition, it also can be recharged via USB. The small port has to be there for firmware upgrades.
You can lock or unlock the power of temperature adjustments by holding in both the fire button and minus button at the same time. While if you holding in the plus and minus buttons together will enter the temperature cure or power curve mode which customizable through downloadable firmware.
The CUPTI 2 will also operate in variable wattage mode with a range of 5-80 watts. If you successive click three times to switch between coil materials and temperature control and wattage modes.
You need to notice: When you're using a new coil for the first time be sure to prime it and allow it to sit in a full tank for several minutes to ensure that it’s saturated.
I have been used the CUPTI for two months, it still works well. I don't need frequent refill e-juice, because it has the large tank 5ml. Overall, it can bring to me all the popular vaping styles what I want.