OFRF NexMesh Coil VS Wotofo Profile RDA Mesh Coil
Mesh Coil/Wire is made from Ni80, Kanthal or SS316L wires with small size for super easy to build. Presents a performance-ready mesh sheets in a plethora of heating elements that caters to mesh rebuildable platforms. Each wire spools measures 5 Feet long in materials, providing ample quantity for your favorite mesh RDAs, such as Wotofo Profile RDA Tank. In this article, we'll pick up two hottest mesh wire, the OFRF NexMesh Coil and WoToFo Strip Coil.
OFRF NexMesh Coil
Designed by OFRF, the nexMESH Coil is made exclusively for the Wotofo x MrJustRight1 Profile 24mm BF RDA. The nexMesh Replacement Coils are made with a perforated Kanthal A1 material with 3 times the mesh density of the standard Wotofo Mesh Style Coils. Features three times as dense as the Wotofo Mesh Style Coil, it comes with lower 0.13ohm resistance to support higher wattage devices, perfect for sub ohm vaping. The increased density and surface area of the nexMESH micro weave netting design increases the heating speed and uniformity, guaranteeing consistent quality performance throughout the life of the coil. The micro weave design of the nexMESH coils also reduce spitback and hot spots. The unique triple density mesh netting maximizes heating surface area to deliver thicker vapor and intense flavor, and the e-juice spit-back situation is significantly decreased.
Three times in density than the Wotofo Mesh Style Coil;
Lightning fast heating;
Lower resistance higer wattage;
Taste the difference;
Reduced spit back
Click to order OFRF NexMesh Replacement Coil
Wotofo Profile RDA Mesh/Strip Coil
The Wotofo Profile RDA Mesh Pre-Built Coils are high-performance sheets of mesh material designed specifically for the Wotofo Profile RDA build deck. After several extensive tests in their research and development department, Wotofo decided to produce these mesh sheets with traditional Kanthal A1 heating material. This material has proven to distribute heat evenly throughout the coil while reducing hot spots and the possibility for burnt hits. The 0.18 ohm Mesh Coil is rated for use between 40-60W to offer outstanding flavor with a balance of massive cloud production. To install these 16mm x 6.8mm sheets, insert one end to one side of the clamp style build deck, then the other, and vape away.
Dimensions: 16mm x 6.8mm
0.18Ω ohm Resistance
Recommended 40W - 60W
Kanthal A1 Construction
10 Strips Per Container
Click to see more detail about Wotofo Profile RDA Strip Coil