Your shopping cart is empty!
Your search returned no results.
Sky Solo Plus
Drone BF Mod
Jan 4, 2019
Smoant Battlestar Series Vape Kit is a star products of the brand, and now they releases a squonk member - Smoant Battlestar Squonker Kit.
Smoant Battlestar Squonk Kit is another dual battery squonker, constructed from Zinc Alloy and PMMA with highly appreciated appearance. It is ergonomic design for simplicity and tiny that ultimate fits with the hands. Meanwhile, it is designed for amazing coil chamber combination. 4 colors for option.
Smoant Battlestar Squonk Mod is powered by dual 18650 batteries and maximum output reached to 200W. Measured 87.5mm by 44.5mm by 40.5mm, Battlestar BF Mod features a comfortable hold feeling in on hand. Supporting voltage range from 6.0V to 8.4V, temperature range from 100 to 300°C (200°F to 600°F).
Smoant Battle Squonk Battery is a temperature control squonk mod, adopting variety output modes including VW, VV and DVW (Wattage Curve).
Mod Size: 87.5mm x 44.5mm x 40.5mm
Battery: Dual 18650 Batteries
Squonk Bottle Capacity: 7ml
Output Mode: VW/ VV/ DVW (Wattage Curve)
TC Mode: Ni/ Ti/ SS316/ TCR
Temperature Range: 100-300°C (200-600°F)
Display Screen: 0.96 inch OLED Screen
Resistance Range: 0.05-3.0Ω
Voltage Range: 6.0-8.4V
Conversion Rate: 95%
Material: Zinc Alloy + PMMA
Colors: Black, Yellow, Gun-Metal, Gradient-Blue
Material: Brass/ SS304
Drip Tip: 810 Resin Drip Tip
Airflow Control: Side Angled Airflow
Post Deck: Dual Coils
Push Button to Squonk
Accurate Temperature Control
2A Quick and Balanced Charging
Includes 2pcs Easy-refill bottle
Resin 810 drip tip
One Extra Solid Pin Included
As we all know, regulated squonk mod is designed as a bottom-feeding box mod, which delivery e-liquid through squeezing bottle with finger, that makes it really hard to tell how much e-juice you’re pumping up into BF RDA.
Smoant Battlestar Squonk Mod, however, comes with a self-developed trigger button on the top of vape mod to control e-liquid flow to prevent over squonking into the RDA.
You can control it by pumping action that about 3 pumps is gonna thoroughly saturate the wick.
You can enjoy no-over squonking pump from now!
Battlestar Squonker Mod features a large 0.96 inch OLED display screen, offering a clear user interface.
Different from normal squonk bottle, Smoant Battlestar Squonk Mod adopts it like a flat bottle.
Battlestar Squonk Mod has large 7ml e-liquid capacity. And it can easily to refill:
Step 1: Open the battery cover and pull the bottle off;
Step 2: Open rubber plug on the bottom of bottle and fill e-liquid;
Step 3: Close plug and re-install and close battery door;
Step 4: You can also leave it in and fill the e-liquid directly as well.
Smoant Battlestar Squonk Mod is powered by dual 18650 batteries. The battery installation as below:
Step 1: Slide and open the battery cover as picture shows;
Step 2: Place dual 18650 batteries into the vape squonk mod according to the correct directions;
Step 3: Close battery cover.
Smoant Battlestar BF RDA with diameter 24mm supports dual coils and single coil, which features large building space for easy coil building.
Battlestar Squonk RDA supports Side Angled Airflow that delivery air directly to cotton for pure flavors.
One Battlestar Squonker Mod
One Spare E-liquid bottle
One Battlestar Squonker RDA
One Solid pin
One Micro USB cable
One Warranty card
One User manual
Two Spare parts pack
you must be of legal age in your state to visit this site
If you have an account, please sign in.
This is a required field.
or connect via
E-Mail Address does not appear to be valid!
Password must be between 6 and 20 characters!
Password confirmation does not match password!
Terms and Conditions