WISMEC EXO Skeleton ES300 300W TC Kit Review
The WISMEC announced the release of the new mod EXO SKELETON ES300 and the KAGE tank. Box mod has the ability to work on two or three batteries, with a maximum output of 200W and 300W, respectively. In the KAGE tank, new WT series coils are used, designed for high power.
Size: 50.7mm x 49.7mm x 86mm
Power: 1-200W (2 batteries) and 1-300W (3 batteries)
Accumulators: high-current 25A 18650
Colors: steel, red, blue
KAGE Tank Specifications:
The maximum power on two batteries is 200W, on three batteries it increases to 300W. Voltage 8V and 9V respectively.
The box body is made of transparent plastic, which allows you to see the board and internal structure.
Under the transparent case LEDs are built in, which light up when the Fire button is pressed.
The KAGE tank uses the new WT coils:
WT-H2 (0,4 Ohm) - is designed for 30-90W.
WT-V3 (0.17 Ohm) is a three-spiral evaporator designed for 80-220W.
The tank uses a simple locking system for the top cap, under which there is a hole for refilling the tank. To open, you only need to pull the drip type and you can refill the tank.
The lower blower in the KAGE is adjusted using the swivel ring. Blow-holes of huge size, all for cooling and the ability to power the tank at high power.
The board supports charging in 2A and supports the special charger Avatar Quick Charger. Like the Pico Dual, the ES300 can work as a bank check and power your smartphone or tablet.