Eleaf iStick Pico 25 85W Box Mod comes with a copmact size, and with a stylish apperance, features a big 0.91-inch screen that offers concise and clear interfaces. Powered by only one 18650 battery and capable of outputting a maximum power of 85W. With high compatibility that can handle various tanks up to 25mm diameter. Comes with 6 colors.
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery
(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes) 0.1-3.5ohm (VW mode)
1×iStick Pico 25 (without battery)
1×QC USB Cable
Compact, Stylish and Powerful
With a compact size, the iStick Pico 25 is very comfortable to hold and carry. Powered by single 18650 battery, it is capable of outputting a maximum power of 85W.
Big 0.91-Inch Screen with Optional Interfaces
The iStick Pico 25 features a big 0.91-inch screen that offers concise and clear interfaces. And there are three switchable interfaces for you to choose the one you’re most accustomed to.
The iStick Pico 25 can handle various tanks up to 25mm diameter.
2A Quick Charge Capability
With a maximum charging current of 2A, the battery in the iStick Pico 25 can be fully charged much more quickly.
Replaceable 18650 Battery
The iStick Pico 25 is powered by a single 18650 battery, allowing to always carry spare batteries with you.
Upgradeable Firmware with Preheat Function
Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest.
Dual Circuit Protection
The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging.
Functions of Micro USB Port
Charging: the 18650 battery can be charged in the iStick Pico 25 through the side USB port via wall adapter or computer or charged with an external battery charger.