The SMOK G320 Marshal Kit With TFV8 Big Baby is the most powerful, most capabilities, combining the highly advanced and expanded functionality of the Marshal G320 Mod with the exceptional TFV8 Big Baby. With a maximum output 320 watts and powered by either dual or triple 18650 batteries when running at full capacity. 3 colors available.
Descriptions: The SMOK G320 Marshal Kit With TFV8 Big Baby is the most powerful, most capabilities, combining the highly advanced and expanded functionality of the Marshal G320 Mod with the exceptional TFV8 Big Baby. It has a maximum output 320 watts and powered by either dual or triple 18650 batteries when running at full capacity. The control interface features a top-positioned 0.96 Inch OLED matrix, with two adjustment buttons positioned at the side of the device, which will bring you the vaping experience to a new level.
Specifications: Battery: 3*18650(Not included) Size: 89.5*60.6*31.1mm Power Range: Max 320W(3pcs battery), Max 220W(2pcs battery) Resistance Range: 0.1-3ohm (VW), 0.06ohm-2ohm(TC) Temperature Control Range: 200 Fahrenheit-600 Fahrenheit/100 degree Celsius-315 degree Celsius Tank Material: Stainless Steel Tank Size: 24.5*56mm Tank Capacity: 5ml Color: Black, Silver, Gold
Package Includes: 1x Marshal Mod 1x TFV8 Big Baby Tank 1x V8 Baby-X4 Core(Preinstalled) 1x V8 Baby-T6 Core(0.2ohm sextuple coils) 1x Replacement Glass Tube 1x User Manual 1x Spare Parts
CREATIVE FUNCTIONAL BUTTONS You can have different vaping experience by the irregular Power button and UP/DOWN button that are filled with creativity.
DELRIN DRIP TIP The delrin drip tip will bring increased airflow and provide you with powerful draw effects.
ADJUSTABLE AIRFLOW SYSTEM Bring you an extremely open draw. Airflow can be adjusted freely by turning the ring at the base of atomizer.
TFV8 BIG BABY BIG FAMILY
TOP REFILL SYSTEM Top refill system makes filling as easy as it gets. Leak proof e-liquid slot can significantly solve leaking problem.
The kits includes
SMOK G320 Marshal Kit Review By Mike Vapes
HOW TO BUILD THE RBA 1. Before starting, make sure your hands are clean. 2. Take RBA deck apart.
3. Install and position the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all is in place, make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base. 4. Cut the excess ends of the wire off.
5. Cut a strip of cotton and make sure it’s not too much and not too little. 6. Insert the cotton and placing it in the middle of the coil. 7. Cut the cotton at an angle and make sure it’s not too short and not too long.
8. Wet the coil with your e-liquid and adjust the cotton. Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.