Save Extra 12% Off Site-Wide When Register To Be Our New Member! Register Now
Your shopping cart is empty!
Your search returned no results.
Acrohm Fush Nano
Acrohm Fush Nano
SMOK TF-RDTA Tank Atomizer designed with 16mm diameter, the deck space has increased by 30 percent(compared with the TF-RCA deck) and be more convenient to build as well as replace. With large capacity of 5ml, that you can enjoy vaping long time.
Add Your Review
Descriptions: SMOK TF-RDTA Tank Atomizer designed with 16mm diameter, the deck space has increased by 30 percent(compared with the TF-RCA deck) and be more convenient to build as well as replace. With large capacity of 5ml, that you can enjoy vaping and without re-fill as often. With TF-RDTA, you can enjoy a strong and open draw like RDA. Specifications: Thread: 510 Capacity: 5.0ml Size: d24.5mm x 63mm Material: Stainless steel, Pyrex glass Color: Stainless steel, Black Resistance: DIY Package Includes: 1 x TF-RDTA Tank(24.5mm) 1 x TF-RDTA S2 Deck(Pre-installed) 1 x Allen Key Screwdriver 1 x Replacement Glass Tube 1 x Smok Vape Band 1 x User Manual 1 x Spare Parts 1 x Gift box with anti-fakelabel
SIDE AIRFLOW SLOTS DIRECT-TO-COIL DESIGN
DECK & BASE TWO-IN-ONE STRUCTURE, MORE JUICE CAPACITY
SUPER BIG REPLACEABLE DECK SO EASY TO BUILD AND REPLACE
NO LEAKING: HIDDEN SEALING RING AND INNOVATIVE JUICE FLOW CONTROL SYSTEM
HOW TO REPLACE THE ATOMIZER CORE
When replacing the atomizer core please operate as follows: unlocking the juice control firstly, inverting the atomizer, second; and then taking away the top of atomizer.
PATENTED SWIVEL TOP CAP DESIGN
DOUBLE-LAYERED DRIP TIP
HOW TO BUILD THE TF-RDTA S2 DECK
1 .Before starting make sure your hands are clean.2.Taking the TF-RDTA S2 deck apart.
3.Installing the pre-wrapped coil.Insert one end of your coil into the left-side holes, and the other end into the right-side holes.4.Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
5.Cutting a strip of cotton and make sure it’s just larger than the coil you built.6.Inserting the cotton, and placing it in the middle.7.Then guide the ends of cotton wick lie on the deck and fully cover the holes below.
8.Cutting the ends and make sure it’s not too short and not too long.9.Wet the coil with your e-liquid and adjust the wick.Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
You're reviewing: SMOK TF-RDTA Tank Atomizer - 5ml
Please fill in nickname!
Reviews has less than 25 words!!!
Please fill in review!
Upload up to 3 photos!
You must enter at least 10 characters.
you must be of legal age in your state to visit this site
If you have an account, please sign in.
This is a required field.
or connect via
E-Mail Address does not appear to be valid!
Password must be between 6 and 20 characters!
Password confirmation does not match password!
Terms and Conditions