Smok TF-RTA G4 Tank Atomizer applied the super big deck-off-base design, with 16mm in diameter, that can be easily to bulid and replace. With four large air slots at the base, you can control airflow as you like. A large capacity of 4.5ml,which can vaping long time. For the top filling, patented swivel top cap design, makes more convenient to refill.
Size: d24.5mm x 65mm
Material: Stainless steel, Pyrex glass
Color: Stainless steel, Black
1 x TF-RTA Tank(24.5mm)
1 x TF-RTA G4 Deck(Pre-installed)
1 x Cross Point Screwdriver for G4 Deck
1 x Replacement Glass Tube
1 x SMOK Vape Band
1 x User Manual
1 x Spare Parts
SUPER BIG DECK-OFF-BASE DESIGN
PRE-MADE WIRES FOR G4 DECK & G2 DECK & G1 DECK
HIDDEN SEALING RING AND INNOVATIVE JUICE FLOW CONTROL SYSTEM
PATENTED SWIVEL TOP CAP DESIGN
DOUBLE-LAYERED DRIP TIP
ADJUSTABLE AIRFLOW SYSTEM
HOW TO BUILD THE RTA(G4)
1.Before starting make sure your hands are clean.
2.Taking the TF-RTA G4 deck apart.
3.Installing the pre-wrapped coil. Insert one end of your coil into the up-side screw, and the other end into the down-side screw.
4.Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
5.Cutting a strip of cotton and make sure it's just larger than the coil you built. 6.Inserting the cotton, and placing it in the middle.
6.Cutting the wick at an angle and make sure it's not too short and not too long.
7.Wet the coil with your e-liquid and adjust the wick.